Sun 8:00 Am - 5:00 Pm | Mon - Sat 7:00 Am - 6:00 Pm

Product Catalog

Description

The EZ-8 drum sander combines professional contractor-type floor sanding results with highly productive, easy-to-use equipment features for the do-it-yourselfer. The EZ-8 comes apart easily for transportation to and from the work site. An enclosed motor eliminates overheating, and the drum lowering lever lets you "feather" the drum like the pros.

Description

The random-orbital sanding action of the OBS-18 removes the scratch patterns left by drum or rotary sanders, leaving a smooth, flat floor ready for refinishing. At 3,600 orbits per minute, the OBS-18 sands faster than any other orbital sander available. With torque-less operation for enhanced operator comfort, the OBS-18 is perfect for interim "screen and recoat" and fine finish sanding jobs.

Description

Sleek edges, fierce styling. Hauling has never been easier.

Description

The Hydraulic Furniture Mover is economically priced. Great for moving furniture or odd shaped loads. Straps to secure load are standard. Hydraulic unit with ratcheting strap tightener.

Description

One of the beefiest angle frame skidloader trailers we make is the 16,000 lb. GVW model.

Description

JET® SJ Series Screw Jack is available in five capacities ranging from 5 to 25 Tons that hold the load without creeping. The cast bell shaped housing provides stability while the Jack design requires less effort to raise the load increasing productivity

Description

Good things come in packages that can become smaller… or something like that. If you’re tired of towing a vehicle behind your RV only to find that the space you’ve reserved isn’t big enough for your haul, let Demco Products introduce you to the KarKaddy SS. It can handle front wheel drive vehicles up to 4,800 pounds and when you arrive, you can fold it in half and stow it away for safe and convenient keeping.

Description

The new Deep Cut Band Saws deliver 2X more durability, best-in-class power at 11 Amps, revolutionary cut visibility and the industry’s largest cut capacity at 5" by 5".

Description

Cable Diameter
1/4in., 5/16in., 3/8in.

Cable Length
25ft., 35ft.

Features
1/2in Reversing Drill, Variable Speed 0-600RPM

Maximum Drain Size
2 1/2in.

Power
Electric

Power Details
3.2 Amps, 120v

Description

50’x1/2"

Description

100’x3/4"

Description

  • Quick Clasp Float Case™
  • 48" SE Bull Float
  • Gator Glide™ Bracket
  • (4) 6' 1-3/4" Button Hdls

Description

5.5HP

Description

3000 PSI

Description

Dewatering pump LB-800A features the Relay Unit (Level Sensor) which incorporates low voltage, stainless steel probes, epoxy and rubber encapsulated timing relay, that turns the unit off when liquid is not present. It saves energy and extends the life of the motor and bearings!

Description

Cable Length
50ft., 75ft.

Minimum Drain Size
1 1/4in.

Maximum Drain Size
3in.

Power
Electric

Power Details
1/3 HP

Description

The D6224-2 Fiberglass Two-Section 24ft Extension Ladder has non-conductive rails making this ladder ideal for working near electricity. With a duty rating of 300lb, the ladder is durable and long lasting. The exclusive Alflo® rung joint means Twist-Proof® performance on the job. The Traction-Tred® D rungs are slip resistant and the side rails are interlocking. The dual action feet are for use on hard or penetrable surfaces and swivel easily. The base and fly sections separate easily to use the base section as a single ladder. The durable rail shield bracket and shoe help protect the bottom of the rail. The fly section rails are pre-pierced at the top for easy field installation of accessories.

Description

The 7312 Fiberglass 12ft Step Ladder has a duty rating of 375lb and features heavy duty aluminum HolsterTop®. With a full set of horizontals and heavy duty internal spreaders, these ladders are built for the long haul. The molded external rail shields and the EDGE® bracing system help decrease damage to the rails. The slip-resistant Traction-Tred® steps are single riveted and have extra wide knee braces. The GLAS*MARK® Violator stripes increase the visibility of the ladder on the jobsite. Fiberglass rails are non-conductive for working near electricity.

Description

Drywall Board Lift with Extension

Description

Features:

  • Thermostat Dial with Digital Display
  • Pressure Gauge
  • Wheel

Description

350 DD Concrete Mixer

Description

Applications:

Hardwood flooring

Description

COMMON APPLICATIONS:

Framing nailer also suitable for decking, fencing, sheathing, siding, sub-floors, & trusses

Description

The lightweight and portable MK-370EXP Tile Saw is made to the highest professional specifications. It features a built-in adjustable 45° cutting head that allows for quick and accurate miter cuts.